Small FAT Arduino Library SD Card Reader


The library supports FAT16 formatted SD cards up to 2GB in size. 4GB FAT16 formatted SD cards might work, but is untested. Long file names are not supported. Keep you file names compliant with the old 8.3 standard. The SD card should be connected to the SPI-pins on your Arduino. Pin connections are available in the documentation in the download.


tinyFAT Arduino Library - SD Card Reader

Comments

Post a Comment

Popular posts from this blog

Block diagram of FM transmitter and receiver and its explanation

Image
Block diagram of FM transmitter and receiver and its explanation FM transmitter Frequency Modulation is the process in which the frequency of the carrier signal is varied by the modulating signal while the amplitude remains constant Using Reactance modulator direct method The FM transmitter has three basic sections. The exciter section contains the carrier oscillator, reactance modulator and the buffer amplifier. The frequency multiplier section, which features several frequency multipliers. The power output section, which includes a low- level power amplifier, the final power amplifier, and the impedance matching network to properly load the power section with the antenna impedance. The essential function of each circuit in the FM transmitter may be described as follows. The Exciter The function of the carrier oscillator is to generate a stable sine wave signal at the rest frequency, when no modulation is applied. It must be able to linearly change frequency when fully modulated, w
Keep reading