Battery Powered Night Lamp Circuit Diagram
Ultra-low current drawing 1.5V battery supply This circuit is usable as a Night Lamp when a wall mains socket is not available to plug-in an ever running small neon lamp device. In order to ensure minimum battery consumption, one 1.5V cell is used, and a simple voltage doubler drives a pulsating ultra-bright LED: current drawing is less than 500µA. An optional Photo resistor will switch-off the circuit in daylight or when room lamps illuminate, allowing further current economy. This device will run for about 3 months continuously on an ordinary AA sized cell or for around 6 months on an alkaline type cell but, adding the Photo resistor circuitry, running time will be doubled or, very likely, triplicated. Battery Powered Night Lamp Circuit Diagram Parts: R1,R2___________1M 1/4W Resistors R3_____________47K 1/4W Resistor (optional: see Notes) R4____________Photo resistor (any type, optional: see Notes) C1____________100nF 63V Polyester Capacitor C2____________220µF 25V Electrolytic Capac...