Audio Power Amplifier 5 8W


General Description:

The NTE1285 and NTE1286 are audio power amplifiers in a 7–Lead SIP type package designed especially for car radio and car stereo applications. These devices are encapsulated in newly developed small packages featuring low thermal resistance, providing easy design for 2Ω. At 14.4V the devices give output power of 7W with RL = 4Ω and 11W with RL = 2Ω.

Features:

High Output Power
Low Transient Noise at Power Supplu Switch ON
Mirror Image Pin Configurations
Protection Circuits are Provided for the Following:
Load Dump Protection
Thermal Shut–Down Protection
Overvoltage Protection
Output Terminal Short–Circuit Protection

Pinout:
Pin diagram Audio Power Amplifier 5.8W
Audio Power Amplifier 5.8W


Comments

Post a Comment

Popular posts from this blog

Small but High Voltage Generator

Image
Here’s a project that could be useful this summer on the beach, to stop anyone touching your things left on your beach towel while you’ve gone swimming; you might equally well use it at the office or workshop when you go back to work. In a very small space, and powered by simple primary cells or rechargeable batteries, the proposed circuit generates a low-energy, high voltage of the order of around 200 to 400 V, harmless to humans, of course, but still able to give a quite nasty ‘poke’ to anyone who touches it. Quite apart from this practical aspect, this project will also prove instructional for younger hobbyists, enabling them to discover a circuit that all the ‘oldies’ who’ve worked in radio, and having enjoyed valve technology in particular, are bound to be familiar with. As the circuit diagram shows, the project is extremely simple, as it contains only a single active element, and then it’s only a fairly ordinary transistor. As shown here, it operates as a low-frequency oscillator...
Keep reading

Build Your Own RC Tankbot

Image
Here’s a blog post that will show you the setup you’ll need to make your own do-it-yourself radio controlled (RC) tankbot from the ground up. This example uses a few kits from Solarbotics to build your own RC controller, communication link, and tankbot using minimal parts. We even managed to get 250 feet of range out of the deal! For this exploit we invite you to move over to the dark side, as the heart of the project isn’t Xbees but instead 2.4GHz IEEE 802.15.4 Radio Frequency Network modules from Synapse Wireless which are actually super simple to use and configure. This post will merely get you started with building a general RC platform, feel free to modify/hack the system to suite your own diabolical requirements.
Keep reading