DS

LM3876 is a high performance audio power amplifier IC from National Semiconductors. The LM3876 can deliver 50watts of output power into an 8 ohm loudspeaker. LM3876 has excellent signal to noise ratio and has wide supply voltage range. Other features of LM3876 are output to ground short circuit protection, input mute function, and output over voltage protection, etc. Applications of LM3876 are component stereo, compact stereo, surround systems, self powered speakers, etc. 50W audio amplifier Circuit Diagram The 50 watt audio amplifier  circuit shown below is designed based on the application diagram from the data sheet of LM3876. Some modifications are made on the original circuit for improving the performance. The bipolar electrolytic capacitor C7 is the input DC decoupling capacitor. R4 is the input resistance. R2 & R1 and bipolar electrolytic capacitor C5 forms a feedback circuit. C2, C1 are filter/by-pass capacitors for the positive supply rail. C4 & C3 are the filters...

The above amplifier circuit based on IC is STK075G, and another equation that is STK084G, STK085, STK086G. and among ic I mentioned that I recommend using ic high supply voltage and high output power and good quality. You can see every ic datasheet at Alldatasheet.com above. Supply voltage between 20 to 55 Volt DC. Part List R1 = 1K R2 = 100R R3 = 100R R4 = 4.7R R5 = 56K R6 = 47R C1 = 1uF C2 = 470pF C3 = 100uF C4 = 100uF C5 = 1800pF C6 = 1uF C7 = 1800pF C8 = 0.047uF C9 = 100uF U1 = STK075G,  STK084G, STK085, STK086G

FEATURES DESCRIPTION The LM4732 is a stereo audio amplifier capable of 2 typically delivering 50W per channel of continuous The LM4732 has short circuit protection and a APPLICATIONS thermal shut down feature that is activated when the  The LM4732 also has an under voltage lock out feature for click and Each amplifier of the LM4732 has an independent KEY SPECIFICATIONS The LM4732 has a wide operating supply range from +/-10V - +/-40V allowing for lower cost unregulated power supplies to be used. Features: • Mute Attenuation 110dB (typ) • PSRR 89dB (typ) • Slew Rate 19V/μs (typ) • Low External Component Count • Quiet Fade-in/out Mute Mode average output power into a 4Ω or 8Ω load with less • Wide Supply Range: 20V - 80V than 10% THD+N from 20Hz - 20kHz. • Audio Amplifier for Component Stereo die temperature exceeds 150°C. • Audio Amplifier for Self-powered Speakers • Output Power/Channel at 10% THD+N, 1kHz  • Audio Amplifier for Compact Stereo pop free power on and off. • Audio...

 TDA1562Q   g eneral description: Philips designers have further improved a number of properties of the IC, among which the power output. According to the Philips datasheet, the improved device, the TDA1562Q, can deliver 70 watts into 4 ohms, but that is at the cost of the distortion, which at 10 per cent is rather too high, even for in a car. The prototype of the design described in this article provides 54 watts into 4 ohms at 1 per cent distortion. Since the number of requisite external components is smaller than in the case of the earlier device, the printed-circuit board is even more compact than that for the February 1995 amplifier.  TDA1562Q  features : Low power dissipation during reproduction of music signals Proof against short-circuits Protection against excessive temperatures Standby switch No power-on or power-off clicks Visible error indication Measurement results (at Ub =14.4 V) Supply voltage 8–18 V Sensitivity 760 mV r.m.s. Input impedance 70 kΩ Powe...