PB137 Charger


This Pb137 charger circuit electronic project can be used for charging lead acid battery. Using the PB137 voltage regulator circuit and some other electronic parts can be designed a charger which is capable to provide 1.5A at 13.7 volts. PB137 is designed by ST Microelectronics in a TO-220 package and is a complete constant voltage battery charger with reverse polarity protection , over temperature protection , over voltage protection and short circuit protection .


PB137 Charger Circuit diagram

PB137 Charger

Comments

Post a Comment

Popular posts from this blog

Block diagram of FM transmitter and receiver and its explanation

Image
Block diagram of FM transmitter and receiver and its explanation FM transmitter Frequency Modulation is the process in which the frequency of the carrier signal is varied by the modulating signal while the amplitude remains constant Using Reactance modulator direct method The FM transmitter has three basic sections. The exciter section contains the carrier oscillator, reactance modulator and the buffer amplifier. The frequency multiplier section, which features several frequency multipliers. The power output section, which includes a low- level power amplifier, the final power amplifier, and the impedance matching network to properly load the power section with the antenna impedance. The essential function of each circuit in the FM transmitter may be described as follows. The Exciter The function of the carrier oscillator is to generate a stable sine wave signal at the rest frequency, when no modulation is applied. It must be able to linearly change frequency when fully modulated, w...
Keep reading