Tiny Card Deals with your Motions


The 17 mm square MM7150 Motion Module from Microchip Technology is a complete, small form-factor board containing a 3-axis accelerometer, 6-axis digital compass and gyroscope sensors pre-programmed with integrated calibration and sensor fusion algorithms. Connections to the board include I2C, power and ground. The board operates at 3.3 V and consumes about 7.68 mA in active mode and around 70 µA in deep sleep.

Tiny Card Deals with your Motions

Features:
Read position & motion data over I2C
Small size 17×17
Pre-programmed and calibrated
Single sided – can be soldered down
SSC7150 motion coprocessor with integrated sensor fusion
9-axis Sensors (accelerometer, magnetometer, gyroscope)

[ ]

Comments

Post a Comment

Popular posts from this blog

Small but High Voltage Generator

Image
Here’s a project that could be useful this summer on the beach, to stop anyone touching your things left on your beach towel while you’ve gone swimming; you might equally well use it at the office or workshop when you go back to work. In a very small space, and powered by simple primary cells or rechargeable batteries, the proposed circuit generates a low-energy, high voltage of the order of around 200 to 400 V, harmless to humans, of course, but still able to give a quite nasty ‘poke’ to anyone who touches it. Quite apart from this practical aspect, this project will also prove instructional for younger hobbyists, enabling them to discover a circuit that all the ‘oldies’ who’ve worked in radio, and having enjoyed valve technology in particular, are bound to be familiar with. As the circuit diagram shows, the project is extremely simple, as it contains only a single active element, and then it’s only a fairly ordinary transistor. As shown here, it operates as a low-frequency oscillator...
Keep reading

Build Your Own RC Tankbot

Image
Here’s a blog post that will show you the setup you’ll need to make your own do-it-yourself radio controlled (RC) tankbot from the ground up. This example uses a few kits from Solarbotics to build your own RC controller, communication link, and tankbot using minimal parts. We even managed to get 250 feet of range out of the deal! For this exploit we invite you to move over to the dark side, as the heart of the project isn’t Xbees but instead 2.4GHz IEEE 802.15.4 Radio Frequency Network modules from Synapse Wireless which are actually super simple to use and configure. This post will merely get you started with building a general RC platform, feel free to modify/hack the system to suite your own diabolical requirements.
Keep reading